It appears that you are currently in United States.
United States
VITABLOCS Mark II: monochromatic, tooth-colored feldspar blanks with shades that match those of residual teeth
Recommended indications*
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
Blocks (mm):
*) This geometry is only available in the 4 VITA SYSTEM 3D-MASTER shades 1M1C, 1M2C, 2M2C und 3M2C.
| Description | Prod. no. 5 pcs. |
|---|---|
| A1C, I-10 |
EC4A1CI105 8 x 10 x 15 mm |
| A1C, I-12 |
EC4A1CI125 10 x 12 x 15 mm |
| A1C, I-14 |
EC4A1CI14 12 x 14 x 18 mm |
| A2C, I-10 |
EC4A2CI105 8 x 10 x 15 mm |
| A2C, I-12 |
EC4A2CI125 10 x 12 x 15 mm |
| A2C, I-14 |
EC4A2CI14 12 x 14 x 18 mm |
| A3.5C, I-10 |
EC4A35CI105 8 x 10 x 15 mm |
| A3.5C, I-12 |
EC4A35CI125 10 x 12 x 15 mm |
| A3.5C, I-14 |
EC4A35CI14 12 x 14 x 18 mm |
| A3C, I-10 |
EC4A3CI105 8 x 10 x 15 mm |
| A3C, I-12 |
EC4A3CI125 10 x 12 x 15 mm |
| A3C, I-14 |
EC4A3CI14 12 x 14 x 18 mm |
| A4C, I-10 |
EC4A4CI105 8 x 10 x 15 mm |
| A4C, I-12 |
EC4A4CI125 10 x 12 x 15 mm |
| A4C, I-14 |
EC4A4CI14 12 x 14 x 18 mm |
| B2C, I-10 |
EC4B2CI105 8 x 10 x 15 mm |
| B2C, I-12 |
EC4B2CI125 10 x 12 x 15 mm |
| B2C, I-14 |
EC4B2CI14 12 x 14 x 18 mm |
| B3C, I-10 |
EC4B3CI105 8 x 10 x 15 mm |
| B3C, I-12 |
EC4B3CI125 10 x 12 x 15 mm |
| B3C, I-14 |
EC4B3CI14 12 x 14 x 18 mm |
| C2C, I-10 |
EC4C2CI105 8 x 10 x 15 mm |
| C2C, I-12 |
EC4C2CI125 10 x 12 x 15 mm |
| C2C, I-14 |
EC4C2CI14 12 x 14 x 18 mm |
| C3C, I-10 |
EC4C3CI105 8 x 10 x 15 mm |
| C3C, I-12 |
EC4C3CI125 10 x 12 x 15 mm |
| C3C, I-14 |
EC4C3CI14 12 x 14 x 18 mm |
| D3C, I-10 |
EC4D3CI105 8 x 10 x 15 mm |
| D3C, I-12 |
EC4D3CI125 10 x 12 x 15 mm |
| D3C, I-14 |
EC4D3CI14 12 x 14 x 18 mm |
| Description | Prod. no. 5 pcs. |
|---|---|
| 0M1C, I-12 |
EC40M1CI125 10 x 12 x 15 mm |
| 0M1C, I-14 |
EC40M1CI14 12 x 14 x 18 mm |
| 1M1C, I-10 |
EC41M1CI105 8 x 10 x 15 mm |
| 1M1C, I-12 |
EC41M1CI125 10 x 12 x 15 mm |
| 1M1C, I-14 |
EC41M1CI14 12 x 14 x 18 mm |
| 1M2C, I-10 |
EC41M2CI105 8 x 10 x 15 mm |
| 1M2C, I-12 |
EC41M2CI125 10 x 12 x 15 mm |
| 1M2C, I-14 |
EC41M2CI14 12 x 14 x 18 mm |
| 2M1C, I-10 |
EC42M1CI105 8 x 10 x 15 mm |
| 2M1C, I-12 |
EC42M1CI125 10 x 12 x 15 mm |
| 2M1C, I-14 |
EC42M1CI14 12 x 14 x 18 mm |
| 2M2C, I-10 |
EC42M2CI105 8 x 10 x 15 mm |
| 2M2C, I-12 |
EC42M2CI125 10 x 12 x 15 mm |
| 2M2C, I-14 |
EC42M2CI14 12 x 14 x 18 mm |
| 2M3C, I-10 |
EC42M3CI105 8 x 10 x 15 mm |
| 2M3C, I-12 |
EC42M3CI125 10 x 12 x 15 mm |
| 2M3C, I-14 |
EC42M3CI14 12 x 14 x 18 mm |
| 3M1C, I-10 |
EC43M1CI105 8 x 10 x 15 mm |
| 3M1C, I-12 |
EC43M1CI125 10 x 12 x 15 mm |
| 3M1C, I-14 |
EC43M1CI14 12 x 14 x 18 mm |
| 3M2C, I-10 |
EC43M2CI105 8 x 10 x 15 mm |
| 3M2C, I-12 |
EC43M2CI125 10 x 12 x 15 mm |
| 3M2C, I-14 |
EC43M2CI14 12 x 14 x 18 mm |
| 3M3C, I-10 |
EC43M3CI105 8 x 10 x 15 mm |
| 3M3C, I-12 |
EC43M3CI125 10 x 12 x 15 mm |
| 3M3C, I-14 |
EC43M3CI14 12 x 14 x 18 mm |
| 4M2C, I-10 |
EC44M2CI105 8 x 10 x 15 mm |
| 4M2C, I-12 |
EC44M2CI125 10 x 12 x 15 mm |
| 4M2C, I-14 |
EC44M2CI14 12 x 14 x 18 mm |
| Description | Prod. no. 2 pcs. |
|---|---|
| 1M1C, I-40/19 |
EC41M1CI40192 15,5 x 19 x 39 mm |
| 1M2C, I-40/19 |
EC41M2CI40192 15,5 x 19 x 39 mm |
| 2M2C, I-40/19 |
EC42M2CI40192 15,5 x 19 x 39 mm |
| 3M2C, I-40/19 |
EC43M2CI40192 15,5 x 19 x 39 mm |
| Description | Prod. no. 5 pcs. |
|---|---|
| 0M1C, I-10 |
EN1M0202360 8 x 10 x 15 mm |
| 0M1C, I-12 |
EN1M0202372 10 x 12 x 15 mm |
| 0M1C, I-14 |
EN1M0202384 12 x 14 x 18 mm |
| 1M1C, I-10 |
EN1M0206360 8 x 10 x 15 mm |
| 1M1C, I-12 |
EN1M0206372 10 x 12 x 15 mm |
| 1M1C, I-14 |
EN1M0206384 12 x 14 x 18 mm |
| 1M2C, I-10 |
EN1M0207360 8 x 10 x 15 mm |
| 1M2C, I-12 |
EN1M0207372 10 x 12 x 15 mm |
| 1M2C, I-14 |
EN1M0207384 12 x 14 x 18 mm |
| 2M1C, I-10 |
EN1M0211360 8 x 10 x 15 mm |
| 2M1C, I-12 |
EN1M0211372 10 x 12 x 15 mm |
| 2M1C, I-14 |
EN1M0211384 12 x 14 x 18 mm |
| 2M2C, I-10 |
EN1M0212360 8 x 10 x 15 mm |
| 2M2C, I-12 |
EN1M0212372 10 x 12 x 15 mm |
| 2M2C, I-14 |
EN1M0212384 12 x 14 x 18 mm |
| 2M3C, I-10 |
EN1M0213360 8 x 10 x 15 mm |
| 2M3C, I-12 |
EN1M0213372 10 x 12 x 15 mm |
| 2M3C, I-14 |
EN1M0213384 12 x 14 x 18 mm |
| 3M1C, I-10 |
EN1M0219360 8 x 10 x 15 mm |
| 3M1C, I-12 |
EN1M0219372 10 x 12 x 15 mm |
| 3M1C, I-14 |
EN1M0219384 12 x 14 x 18 mm |
| 3M2C, I-10 |
EN1M0220360 8 x 10 x 15 mm |
| 3M2C, I-12 |
EN1M0220372 10 x 12 x 15 mm |
| 3M2C, I-14 |
EN1M0220384 12 x 14 x 18 mm |
| 3M3C, I-10 |
EN1M0221360 8 x 10 x 15 mm |
| 3M3C, I-12 |
EN1M0221372 10 x 12 x 15 mm |
| 3M3C, I-14 |
EN1M0221384 12 x 14 x 18 mm |
| 4M2C, I-10 |
EN1M0228360 8 x 10 x 15 mm |
| 4M2C, I-12 |
EN1M0228372 10 x 12 x 15 mm |
| 4M2C, I-14 |
EN1M0228384 12 x 14 x 18 mm |
| Description | Prod. no. 5 pcs. |
|---|---|
| A1C, I-10 |
EN1M0236360 8 x 10 x 15 mm |
| A1C, I-12 |
EN1M0236372 10 x 12 x 15 mm |
| A1C, I-14 |
EN1M0236384 12 x 14 x 18 mm |
| A2C, I-10 |
EN1M0237360 8 x 10 x 15 mm |
| A2C, I-12 |
EN1M0237372 10 x 12 x 15 mm |
| A2C, I-14 |
EN1M0237384 12 x 14 x 18 mm |
| A3C, I-10 |
EN1M0238360 8 x 10 x 15 mm |
| A3C, I-12 |
EN1M0238372 10 x 12 x 15 mm |
| A3C, I-14 |
EN1M0238384 12 x 14 x 18 mm |
VITA LUMEX® AC
Ideal shade fidelity. Excellent light dynamics. Precise processing.
VITA AKZENT® Plus
Optimizes everything. Effortlessly.
VITA ADIVA® FULL-ADHESIVE
The full-adhesive luting system with perfectly matched components for conditioning tooth substance and restorative material
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITABLOCS Mark II – SYSTEM SOLUTIONS*
VITA offers VITABLOCS with specific holder systems for the CAD/CAM systems:
VITABLOCS Mark II – UNIVERSAL SOLUTIONS*
VITA offers VITABLOCS with universal holder system for the CAD/CAM systems:
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now