Search & find

From partial dentures and highly esthetic challenges to comprehensive implant denture restorations using VITAPAN EXCELL: Be inspired by our case reports from fellow professionals!

Dentist, dental technician, and patient on the VITAPAN EXCELL denture tooth
: Read here for more on the treatment steps with new anterior restorations

A modern denture tooth for full, partial, and implant-supported dentures: Discover our range of shades and moulds, case studies and testimonials now!

Lifelike environment for VITA MFT^®: The mucogingival art gallery of Boris Jovanovic ► Find out more

Case report and laboratory workflow with the VITAPAN EXCELL denture tooth Read the experience of denturist Tanya Little and her patient Deanne here

Beautiful and versatile for successful full dentures ► Find out more

Integrated Esthetics and Easy Centric for Economical Rehabilitations ► Find out more

Patient case of full dental prosthetics by Dr. Fumiaki Yamazaki with technical dental implementation by Toru Odagaki

VITA MFT^®: Cost-effective partial dentures in a variety of shapes and shades ► Find out more

The Patient’s Need: Economic Esthetics and Functionality ► Find out more

The VITA Newsroom is where all the news used in VITA communication come together. Compact and up to date, information, news and the latest announcements are all available here, first hand and at a gla...

VITA AKZENT LC Brings Color to the Digital Workflow

Functional and Esthetic Rehabilitation of a Periodontally Compromised Patient with a Telescopic Prosthesis ► Find out more

VITA MFT^® patient cases ► Find out more

Science made simple – find out what's behind the VITA SYSTEM 3D-MASTER shade standard: Here's how to precisely determine tooth shades for greater process reliability

02.01.2024 ...

This is how prosthetics are made! The name VITA Zahnfabrik is known worldwide for top-quality products and consistent, competent outcomes.

VITAPAN EXCELL^® / VITAPAN^® LINGOFORM

23.09.2024 ...

VITA Easyshade^® V - digital, precise and fast tooth shade determination - optimal for bleaching treatments.

08.09.2023 ...

17.02.2026 ...

VITA VIONIC^® BOND or VITA VIONIC^® BOND multiDose are components of VITA VIONIC^® SOLUTIONS, the system for the digitally supported removable dentures from VITA Zahnfabrik.

Denture Module with a valid license for either the 3Shape Dental System (Version 2021 or newer) or exocad Dental CAD (version 3.1 Reijka or newer).

All seven setup concepts can be achieved with one and the same tooth line, VITA VIONIC (DIGITAL) VIGO. You do not need different tooth lines for the various setup concepts.

The reason for this is the universal design of the occlusal surfaces of VITA VIONIC posterior teeth. These allow all the setup concepts mentioned to be achieved.

Includes the largest number of setup concepts (seven). Universal occlusal surface geometry: one tooth line for all setups. Combination of anterior and posterior teeth (no fixed 28-tooth setups); individualization of the setup still possible. VIONIC DIGITAL VIGO: Possible to work with VITA VIONIC VIGO denture teeth, as well as milled / 3D-printed teeth. Open system: VIONIC (DIGITAL) VIGO can also be used with milling blanks or with 3D-print materials from competitor companies.

No, activation is only applicable for the specific respective USB connector that has been activated or for the specific software usage license associated with it. 

Only a one-time payment for use at any time, as long as a valid license is available for the 3Shape Denture Module or the exocad FullDenture module. VITA VIONIC DIGITAL VIGO is activated for a specific USB connector / software license and cannot be transferred.

The VITA VIONIC VIGO Denture Tooth Library (without the option to export tooth data) can be downloaded free of charge and used without any additional steps.

1. Order VITA VIONIC DIGITAL VIGO through the VITA website.
2. Complete payment.
3. Activate the VITA VIONIC DIGITAL VIGO Denture Tooth Library via the partner software company (3Shape or exocad).
4. Update the VITA VIONIC VIGO Denture Tooth Library for the activated USB connector through the download portal (3Shape) or website (exocad).
5. If required, restart the 3Shape Dental System or exocad Dental DB.

VITA VIONIC DIGITAL VIGO is now available for use.

Link to the order website: www.vita-zahnfabrik.com/vionicdigitalvigo

The adhesive is the same, only the dosage type is different.

• VITA VIONIC^® BOND KIT is a single-use application that contains enough material to bond approx. 28 denture teeth. The components come pre-measured and do not need to be dosed.
• VITA VIONIC^® BOND multiDose is designed for multiple applications. The components have to be dosed by the user with the measuring cup. It contains enough material to bond approx. 25 x 14 denture teeth to the respective denture bases.

All other processing and mechanical/physical properties of the adhesive are identical.

Of the tooth libraries currently on the market, VITA VIONIC (DIGITAL) VIGO contains the largest selection of 28-tooth setup concepts, a total of seven concepts. These are:

• Setups with "curved" posterior arches (second molar, distal to oral rotation / curved setup): lingualized, buccalized, crossbite, Prof. Gerber setup.
• Setups with linear posterior tooth setup (central fissures for all posterior teeth run in a line; "straight setup"): lingualized, buccalized, Dutch LoC (similar to a lingualized setup, but the first premolar only has one contact point at the mesial-proximal ridge).

This is possible in 3Shape and exocad, however, a configuration file must be modified. VITA or exocad can provide support for that.

06.04.2023 ...

VITA VIONIC BASE RESIN FLEX is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

Patient case Manoj Chhabra and Rohit Rana. GHAZIABAD, India. Case study: Restauration of two incisors. with zirconia combined with VITA VM 9.

Up to 42 units can be milled per disc, depending on the selected tooth size and positioning in the disc.

VITA VIONIC BASE RESIN IMPACT is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

Please use the reusable VITA VIONIC^® BOND multiDose measuring cup for dosing and mixing.

Dosing table:

Dosing instructions, here in the example for the total quantity of 1 ml (sufficient to bond 14 denture tooth units):

For further processing instructions, see instructions for use for VITA VIONIC^® BOND multiDose (922-13100).

VITA Company Quality

Yes, VITA AKZENT LC light-curing composite stains have been validated for use with the NK Optik Otoflash G171 N2 post-curing device.

Without nitrogen, 1800 flashes must be used.

With nitrogen, 900 flashes are sufficient to cure VITA AKZENT LC.

VITA VIONIC DENT DISC multiColor is available in 18 shades – 16 VITA classical A1-D4^® shades (A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4) and two Bleached shades (0 M1, 0 M3).

Aus 1 kg VITA VIONIC BASE RESIN FLEX können ca. 606 flexible Klammerprothesen gedruckt werden, welche eine Größe von 1-2 zu ersetzenden Zähnen haben und in eine kleine Schaltlücke passen.

Die tatsächliche Anzahl gedruckter Objekte, die mittels 1kg Harz hergestellt werden können, ist von mehreren Faktoren abhängig wie z.B. der Größe der Klammerprothese, der Anzahl an Stützstrukturen und ob das Harz in der Druckwanne gelagert wird bzw. Materialverluste beim Abtropfen entstehen.

VITA VIONIC DENT DISC multiColor is available with a diameter of 98.4 mm and a disc height of 20 mm (universal geometry with circumferential shoulder).

VITA VIONIC DENT DISC multiColor is suitable for all open systems with a universal disc holder.

We recommend a combination of VITA VIONIC DENT DISC multiColor and VITA VIONIC BASE DISC HI, together with VITA VIONIC BOND adhesive.

Each VITA VIONIC DENT DISC multiColor disc, is a genuine multilayer disc comprising four layers that are perfectly adapted to one another.

VITA VIONIC^® BOND and VITA VIONIC^® BOND multiDose are self-curing. The curing process begins as soon as the two components of the adhesive come into contact with each other. At an ambient temperature of approx. 21 °C (70 °F), the working time is approx. 10 minutes. If the adhesive begins to gel or form threads, discontinue use.

The material thickness determines the flexibility of the partial denture. The finer the clamp design, the more flexible it reacts, while a stronger design provides more stability.

• Clamps: Ideally 1-1.5 mm
• Minimum wall thickness of tooth pockets: 0.8-1 mm
• Bonding gap for teeth: 150µm
• Palatal: 2-3 mm
• Sublingual: 3-5 mm

If stored correctly (closed tightly at a temperature between 5 °C and 10 °C, that is, 41 °F and 50 °F), it should be used within 90 days of opening.

Both approaches are possible.

Always store it tightly closed in the refrigerator between 5 °C (41 °F) and 10 °C (50 °F). Protect from direct sunlight.

Fracture work values indicate how well a component/material can absorb shocks and impacts (impact energy).

By taking measurements, you can find out at what load the material breaks or starts to give.

The impact strength measurements can be used to draw conclusions about the durability of denture bases, for example.

An impact-resistant denture base material reduces the risk of breakage but does not eliminate it (impact-resistant ≠ unbreakable).

The breaking strength in the event of a fall is highly dependent on the angle of impact and the impact surface. An unfortunate angle and a hard surface will increase the chances of the dentures breaking. This applies to all material types.

The VITA VIONIC VIGO Denture Tooth Library that is free to download only allows monoblock try-ins and denture bases to be exported. The tooth data cannot be exported. This means that denture teeth cannot be milled or printed using 3D systems (only the try-in dentures and the denture bases). The denture bases that have been milled or printed using 3D systems are completed with VITA VIONIC VIGO denture teeth.

In addition to allowing VITA VIONIC VIGO denture teeth to be used, the fee-based VITA VIONIC DIGITAL VIGO Denture Tooth Library also allows the tooth data to be exported so that the denture teeth can be milled or printed using 3D systems.

The cleaning process is carried out by dental laboratories/dental practices in an ultrasonic bath (room temperature water bath). Do not use heat-based disinfection or sterilization methods. This could cause the denture to lose its shape.

Brief immersion disinfection is possible without any problems, provided that ethanol-based disinfectants are not used.

For daily cleaning of the dentures, the patient should use lukewarm water, a soft toothbrush, liquid soap or dishwashing liquid. Rinse well afterwards. Denture cleaning tablets can be used according to the manufacturer's instructions.

Notes: Do not use toothpaste, as the abrasive particles are coarse and will scratch the dentures. Do not use acids or solvents, as these will deteriorate the material properties when applied.

Yes, the following soft relining materials have been tested:

• LabSide: Molloplast^® B
• Chairside: Mollosil^® plus

VITA lives education. We combine theory & practice. ► Discover course formats here!

The Otoflash G171 N2 has been validated for VITA AKZENT LC with a UV filter type 280 N2. This filter transmits wavelengths from 280 to 700 nm.

• A simple, clean bonding process.
• Proven good adhesion, tested according to ISO 22112 and DIN ISO/TS 19736.
• The precise fit of the denture teeth with the denture base is maintained, meaning that little to no manual reworking is required (e.g., little to no adjustment of the occlusion).

VITA AMBRIA, the zirconia-reinforced lithium disilicate ➤ Discover Jürgen Freitag's patient case now

Yes, printed denture bases made of VITA VIONIC BASE RESIN IMPACT can be relined/repaired.

1)     Roughen the surface
2)     Apply cold-curing polymer (e.g., Schütz Dental Futura Gen pink opaque or Paladur rosa/pink)

The components to be bonded (denture teeth, denture base) have to fit together precisely, as VIONIC^® BOND does not fill gaps.

For the specification in the design software (Denture Module from 3Shape A/S or exocad GmbH), we recommend:

• For milled denture bases in combination with VITA VIONIC VIGO^® prefabricated tooth: 40 µm bonding gap.

• For milled denture bases in combination with milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor: 80 µm bonding gap.
• Larger gaps may be necessary for 3D-printed denture bases.

Tip: The denture tooth elements should fit into the corresponding alveoli of the denture base without force, but at the same time, they should also not have any noticeable play.

The bonding surfaces of the components must be dry and free of dust, grease, wax, cooling lubricants and other contaminants.

Patient case Luis Miguel Vera. Restoration of a front tooth with VITA PM 9

Approx. 50 denture bases can be printed from 1 kg of VITA VIONIC BASE RESIN IMPACT.

The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.

Approx. 28 monoblocks or 60 try-ins (single jaw) can be printed from 1 kg of VITA VIONIC TRY-IN RESIN.

The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.

03.04.2025 ...

VITA recommends the following procedure for vacuum-based, validated devices (such as the Asiga Cure or RapidShape Cure):

Step 1: ​

Secure the printed teeth in the denture base using a light-curing UV hand lamp, provided that you are using the printing material as an adhesive. It is sufficient to irradiate the areas between the tooth and the base for a few seconds.

Step 2:​

Complete curing in the device using the VITA template.

05.10.2022 ...

Yes, printed clasp dentures made from VITA VIONIC BASE RESIN FLEX can be repaired and extended.

VITA recommends the following materials and procedures for this purpose:

• For the shade pink translucent: Astron Labtec Pro
• For the shade clear: Astron Clearsplint

1. Sandblasting with Al₂O₃ (50 µm, 2 bar)
2. Application of VITA VM LC Primer II to condition the denture base.
3. Apply a thin, even layer using a disposable brush. Then cure with an approved light-curing device in accordance with the polymerization instructions for VITA VM LC Primer II.
4. Application and processing of Astron Clearsplint or Astron Labtec Pro according to the manufacturer's instructions.

Repairs using classic cold polymer are also possible in principle. However, the rigid material can impair the flexibility of the partial denture, thereby reducing the expected service life of the denture.

24.06.2022 ...

10.10.2024 ...

15.05.2025 ...

In the interview dental technician Viktor Fürgut reported on his experiences with the new VITAPAN EXCELL set of anterior teeth VITA.

31.01.2025 ...

25.09.2023 ...

You simply have to have VITAPAN EXCELL. Interview with master dental technician Anett Böttcher.

23.03.2021 ...

28.10.2025 ...

16.03.2025 ...

In this interview, the dental technician describes her experiences with VITAPAN EXCELL anterior teeth VITA.

Veteran prosthetics expert meets VITAPAN EXCELL^®. Interview with master dental technician Franz Hoppe.

04.12.2023 ...

VITA AKZENT LC: An implant-prosthetic work of art in the esthetic zone

A treatment concept in dentistry that aims to protect healthy tissue and tooth substance as far ...

Dental Visionist Italienisch 2.9 Abonnenten Spanisch

Since 1924, we have been developing ever better solutions for perfect prosthetics in terms of function and esthetics. This is the VITA PERFECT MATCH and groundbreaking claim of VITA Zahnfabrik. Dental...

VITA Easyshade^® V & VITA mobileAssist. Tooth shade determination

Read about how a young dental technology trio has achieved a new level of quality using the press ceramic VITA AMBRIA

Technical device used in dentistry to simulate the movement of the temporomandibular joint and ...

Patient case Georgy Gerasimov. Anterior tooth veneer and crowns with minimally invasive preparation, fabricated with VITA VM 13.

VITA Shade Systems

02.09.2024 ...

VITA VIONIC TRY-IN RESIN is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

Important information and recommendations regarding the European Medical Device Regulation (MDR)

Fast, simple, and outstanding precision – How to increase your process reliability thanks to digital determination of natural teeth shades with VITA Easyshade LITE

Acrylate-based materials (PMMA and acrylate-based composites). Used especially for permanently bonding denture teeth:

• VITA VIONIC VIGO^® prefabricated teeth or
• milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor

with

• milled denture bases made of VITA VIONIC^® BASE DISC HI.
• Furthermore, the adhesive bond achieved with VITA VIONIC^® BOND has been validated on various 3D-printed denture base materials from the competition. List: https://www.vita-zahnfabrik.com/vionic_compatibility

"In 1990, the machine trading division of the W. Geis engineering office (founded in 1983) became a separate business and was established as MB Maschinenhandel Biebergemund GmbH."

MB develops, manufactures and sells machines for spark erosion applications. The second key element of the business is dental milling technology.

Proven, simultaneous 5-axis milling machines as well as continuous innovation in the processing of all materials and in milling technology complete the business profile.

VITA Zahnfabrik and MB Maschinen GmbH develop and validate templates on an ongoing basis for processing VITA CAD/CAM materials using MB dental milling machines.

VITA patient case from Dr. Feng Liu, China. Cosmetic treatment: anterior tooth veneer with minimally invasive preparation

VITA Customer service

VITA calendar june Björn Czappa

19.06.2024 ...

Yes, the resin can be stored in the tray temporarily between two printing jobs. It must be protected from light and stored at room temperature (14 – 28°C). Before each new print, ensure that no fragments from previous printing jobs have been left in the resin. If in doubt, the resin should be filtered through a fine sieve before reusing. It is also important to homogenize the resin in the tray before starting a new printing job. Here, a silicone spatula is used to mix the resin thoroughly in the tray.

For every challenge VITAPAN EXCELL^®. Interview with dental technician Benjamin Strasser.

Shade reproduction

The photoinitiators in the resin react in the post-curing units during the curing process, and in the case of VITA VIONIC DENT RESIN, leave behind a yellow tint. This yellow tint will disappear on its own within a few days after curing. However, this process can also be accelerated artificially. This is especially true for lighter shades (0M3, A1 and B1), where the shade match can be visibly achieved faster due to the acceleration of the color drift. 

Here, VITA recommends:

Option 1:

After the final polish, place the printed dentures under an LED lamp with a blue light for approx. three hours (wavelength 450-480 nm).

The following device can be used as example:

• FINOLUX light polymerization device 400-550nm

Option 2:

Alternatively, after the final polishing, you can place the printed denture in a heating cabinet or oven at 60°C for approx. 5 h.

^{Due to the technology used, all printed materials cannot achieve the final shade immediately after curing. This recommendation from VITA offers users a way of accelerating color drift. Blue light treatment is optional and is not a necessary step in the workflow.}

04.12.2025 ...

Patient case Eric Berger. Restorations of two incisors with VITA SUPRINITY PC in combination with VITA VM 11.

10.03.2020 ...

You will find safety data sheets for VITA products here, as well as information on general risks associated with dental treatments, residual risks associated with product groups in dentistry (such as ...

12.02.2024 ...

Patient case Francesco Ferretti, Rome, Italy. Restoration of a front tooth with VITA PM 9

Clinical Case VITA VMK MASTER

01.09.2023 ...

12.06.2023 ...

09.11.2022 ...

09.01.2025 ...

Jürgen Freitag: "The experiment was astonishing: By applying just a small amount of material, I was able to achieve incredible effects."

VITAPAN EXCELL – combines the best. Interview with master dental technician Conrad Frerichs

09.01.2025 ...

VITAPAN EXCELL^®: for all applications. Interview with dental technician Berit Hantusch.

16.01.2023 ...

24.04.2023 ...