United StatesIt appears that you are currently in United States.
Confirm
Select a different country

VITABLOCS® Mark II

Proven a million times over.

VITABLOCS Mark II are monochromatic, tooth-colored feldspar blanks that integrate impressively into the remaining tooth substance and are very well suited for processing esthetic reconstructions.

Durable
Fabricating reliable restorations from durable materials with very good clinical performance.
Highly esthetic
Makes highly esthetic restorations possible with brilliant shade and light play.
Efficient
Time-saving fabrication and polishing of the restoration without the need for additional firing.

  • inlay
  • onlay
  • partial crown

These are recommended indications. The entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective instructions for use of the products.

  • VITA SYSTEM 3D-MASTER®
    0M1C (for I12, I14), 1M1C, 1M2C, 2M1C, 2M2C, 2M3C, 3M1C, 3M2C, 3M3C, 4M2C
  • VITA classical A1-D4®
    A1C, A2C, A3C, A3.5C, A4C, B1C, B2C, B3C, C2C, C3C, D3C

Blocks (mm):

  • I-10 ( 8 x 10 x 15)
  • I-12 (10 x 12 x 15)
  • I-14 (12 x 14 x 18)
  • I-40/19 (15,5 x 19 x 39)*

*) This geometry is only available in the 4 VITA SYSTEM 3D-MASTER shades 1M1C, 1M2C, 2M2C und 3M2C.

VITABLOCS® Mark II products

VITABLOCS® Mark II for CEREC®/inLab® VIT

VITABLOCS Mark II for CEREC/inLab, 5 pcs.
Description Prod. no. 5 pcs.
A1C, I-10 EC4A1CI105
8 x 10 x 15 mm
A1C, I-12 EC4A1CI125
10 x 12 x 15 mm
A1C, I-14 EC4A1CI14
12 x 14 x 18 mm
A2C, I-10 EC4A2CI105
8 x 10 x 15 mm
A2C, I-12 EC4A2CI125
10 x 12 x 15 mm
A2C, I-14 EC4A2CI14
12 x 14 x 18 mm
A3.5C, I-10 EC4A35CI105
8 x 10 x 15 mm
A3.5C, I-12 EC4A35CI125
10 x 12 x 15 mm
A3.5C, I-14 EC4A35CI14
12 x 14 x 18 mm
A3C, I-10 EC4A3CI105
8 x 10 x 15 mm
A3C, I-12 EC4A3CI125
10 x 12 x 15 mm
A3C, I-14 EC4A3CI14
12 x 14 x 18 mm
A4C, I-10 EC4A4CI105
8 x 10 x 15 mm
A4C, I-12 EC4A4CI125
10 x 12 x 15 mm
A4C, I-14 EC4A4CI14
12 x 14 x 18 mm
B2C, I-10 EC4B2CI105
8 x 10 x 15 mm
B2C, I-12 EC4B2CI125
10 x 12 x 15 mm
B2C, I-14 EC4B2CI14
12 x 14 x 18 mm
B3C, I-10 EC4B3CI105
8 x 10 x 15 mm
B3C, I-12 EC4B3CI125
10 x 12 x 15 mm
B3C, I-14 EC4B3CI14
12 x 14 x 18 mm
C2C, I-10 EC4C2CI105
8 x 10 x 15 mm
C2C, I-12 EC4C2CI125
10 x 12 x 15 mm
C2C, I-14 EC4C2CI14
12 x 14 x 18 mm
C3C, I-10 EC4C3CI105
8 x 10 x 15 mm
C3C, I-12 EC4C3CI125
10 x 12 x 15 mm
C3C, I-14 EC4C3CI14
12 x 14 x 18 mm
D3C, I-10 EC4D3CI105
8 x 10 x 15 mm
D3C, I-12 EC4D3CI125
10 x 12 x 15 mm
D3C, I-14 EC4D3CI14
12 x 14 x 18 mm

VITABLOCS® Mark II for CEREC®/inLab® VIT

VITABLOCS Mark II for CEREC/inLab, 5 pcs.
Description Prod. no. 5 pcs.
0M1C, I-12 EC40M1CI125
10 x 12 x 15 mm
0M1C, I-14 EC40M1CI14
12 x 14 x 18 mm
1M1C, I-10 EC41M1CI105
8 x 10 x 15 mm
1M1C, I-12 EC41M1CI125
10 x 12 x 15 mm
1M1C, I-14 EC41M1CI14
12 x 14 x 18 mm
1M2C, I-10 EC41M2CI105
8 x 10 x 15 mm
1M2C, I-12 EC41M2CI125
10 x 12 x 15 mm
1M2C, I-14 EC41M2CI14
12 x 14 x 18 mm
2M1C, I-10 EC42M1CI105
8 x 10 x 15 mm
2M1C, I-12 EC42M1CI125
10 x 12 x 15 mm
2M1C, I-14 EC42M1CI14
12 x 14 x 18 mm
2M2C, I-10 EC42M2CI105
8 x 10 x 15 mm
2M2C, I-12 EC42M2CI125
10 x 12 x 15 mm
2M2C, I-14 EC42M2CI14
12 x 14 x 18 mm
2M3C, I-10 EC42M3CI105
8 x 10 x 15 mm
2M3C, I-12 EC42M3CI125
10 x 12 x 15 mm
2M3C, I-14 EC42M3CI14
12 x 14 x 18 mm
3M1C, I-10 EC43M1CI105
8 x 10 x 15 mm
3M1C, I-12 EC43M1CI125
10 x 12 x 15 mm
3M1C, I-14 EC43M1CI14
12 x 14 x 18 mm
3M2C, I-10 EC43M2CI105
8 x 10 x 15 mm
3M2C, I-12 EC43M2CI125
10 x 12 x 15 mm
3M2C, I-14 EC43M2CI14
12 x 14 x 18 mm
3M3C, I-10 EC43M3CI105
8 x 10 x 15 mm
3M3C, I-12 EC43M3CI125
10 x 12 x 15 mm
3M3C, I-14 EC43M3CI14
12 x 14 x 18 mm
4M2C, I-10 EC44M2CI105
8 x 10 x 15 mm
4M2C, I-12 EC44M2CI125
10 x 12 x 15 mm
4M2C, I-14 EC44M2CI14
12 x 14 x 18 mm

VITABLOCS® Mark II for Rapid Layer Techn

VITABLOCS Mark II for RLT, 2 pcs.
Description Prod. no. 2 pcs.
1M1C, I-40/19 EC41M1CI40192
15,5 x 19 x 39 mm
1M2C, I-40/19 EC41M2CI40192
15,5 x 19 x 39 mm
2M2C, I-40/19 EC42M2CI40192
15,5 x 19 x 39 mm
3M2C, I-40/19 EC43M2CI40192
15,5 x 19 x 39 mm

VITABLOCS® Mark II UNIVERSAL VITA SYSTEM

VITABLOCS Mark II UNIVERSAL, 5 pcs.
Description Prod. no. 5 pcs.
0M1C, I-10 EN1M0202360
8 x 10 x 15 mm
0M1C, I-12 EN1M0202372
10 x 12 x 15 mm
0M1C, I-14 EN1M0202384
12 x 14 x 18 mm
1M1C, I-10 EN1M0206360
8 x 10 x 15 mm
1M1C, I-12 EN1M0206372
10 x 12 x 15 mm
1M1C, I-14 EN1M0206384
12 x 14 x 18 mm
1M2C, I-10 EN1M0207360
8 x 10 x 15 mm
1M2C, I-12 EN1M0207372
10 x 12 x 15 mm
1M2C, I-14 EN1M0207384
12 x 14 x 18 mm
2M1C, I-10 EN1M0211360
8 x 10 x 15 mm
2M1C, I-12 EN1M0211372
10 x 12 x 15 mm
2M1C, I-14 EN1M0211384
12 x 14 x 18 mm
2M2C, I-10 EN1M0212360
8 x 10 x 15 mm
2M2C, I-12 EN1M0212372
10 x 12 x 15 mm
2M2C, I-14 EN1M0212384
12 x 14 x 18 mm
2M3C, I-10 EN1M0213360
8 x 10 x 15 mm
2M3C, I-12 EN1M0213372
10 x 12 x 15 mm
2M3C, I-14 EN1M0213384
12 x 14 x 18 mm
3M1C, I-10 EN1M0219360
8 x 10 x 15 mm
3M1C, I-12 EN1M0219372
10 x 12 x 15 mm
3M1C, I-14 EN1M0219384
12 x 14 x 18 mm
3M2C, I-10 EN1M0220360
8 x 10 x 15 mm
3M2C, I-12 EN1M0220372
10 x 12 x 15 mm
3M2C, I-14 EN1M0220384
12 x 14 x 18 mm
3M3C, I-10 EN1M0221360
8 x 10 x 15 mm
3M3C, I-12 EN1M0221372
10 x 12 x 15 mm
3M3C, I-14 EN1M0221384
12 x 14 x 18 mm
4M2C, I-10 EN1M0228360
8 x 10 x 15 mm
4M2C, I-12 EN1M0228372
10 x 12 x 15 mm
4M2C, I-14 EN1M0228384
12 x 14 x 18 mm

VITABLOCS® Mark II UNIVERSAL VITA classi

VITABLOCS Mark II UNIVERSAL, 5 pcs.
Description Prod. no. 5 pcs.
A1C, I-10 EN1M0236360
8 x 10 x 15 mm
A1C, I-12 EN1M0236372
10 x 12 x 15 mm
A1C, I-14 EN1M0236384
12 x 14 x 18 mm
A2C, I-10 EN1M0237360
8 x 10 x 15 mm
A2C, I-12 EN1M0237372
10 x 12 x 15 mm
A2C, I-14 EN1M0237384
12 x 14 x 18 mm
A3C, I-10 EN1M0238360
8 x 10 x 15 mm
A3C, I-12 EN1M0238372
10 x 12 x 15 mm
A3C, I-14 EN1M0238384
12 x 14 x 18 mm

VITABLOCS Mark II – SYSTEM SOLUTIONS*

VITA offers VITABLOCS with specific holder systems for the CAD/CAM systems:

  • CEREC/inLab (Dentsply Sirona)
  • PlanMill 40/PlanMill 40S/PlanMill 50S (Planmeca)
  • Ceramill mikro IC/Ceramill Motion 2/Ceramill Matik (Amann Girrbach AG)

VITABLOCS Mark II – UNIVERSAL SOLUTIONS*

VITA offers VITABLOCS with universal holder system for the CAD/CAM systems:

  • CORiTEC Serie (imes-icore GmbH)
  • DGSHAPE DWX-4W(DGSHAPE Corporation)
  • CS 3000/CS3100 (Carestream Dental, Inc.)
  • N4/R5/S1/S2/Z4 (vhf camfacture AG)
  • Zfx Inhouse5x (ZfxGmbH)
  • Organical Desktop Serie (R+K CAD/CAM Technologie GmbH &Co. KG)
  • DMG ULTRASONIC-Serie (DMG Mori AG)

*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.

Instructions for use

No. 10536 Processing recommendation VITABLOCS grinding (Version 001)

EN

No. 10756 VITABLOCS Kurzversion (Version 001)

EN
FR

No. 1769 VITABLOCS (Version 012)

EN
FR
Brochures

No. 10527 VITA DENTIST SOLUTIONS (Version 005)

EN
FR

No. 994 VITA CAD/CAM Materials (Version 013)

EN
FR
Order blocks

No. 10460 VITA CAD/CAM Materials UNIVERSAL (Version 003)

EN

No. 1408M VITA CAD/CAM Materials DENTAL SOLUTIONS (Version 014)

EN
Safety data sheets

SD261 VITABLOCS (Version 005)

General Risks

General Risks (Version 002)

EN
FR
Residual Risks

VITABLOCS (Version 002)

EN
FR
Summary of Safety and Clinical Performance (SSCP)

VITABLOCS (Version 004)

EN

VITABLOCS (Version 002)

FR

Easy download for multiple documents

Download a .zip file containing all the selected files in a single step.
Simply tick the files then click here.

Register for MyVITA now

Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.

Register now