It appears that you are currently in United States.
United States
ENAMIC® multiColor delivers highly esthetic, long-lasting restorations with amazing shade accuracy in line with the proprietary VITA 3D-MASTER® shade system.
Recommended indications*
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
VITA SYSTEM 3D MASTER®, high translucent (HT)
1M1, 1M2, 2M2, 3M2, 4M2
Blocks (mm):
| Description | Prod. no. 5 pcs. |
|---|---|
| 1M1-HT, EMC-14 |
EC4EC4062765 12 x 14 x 18 mm |
| 1M1-HT, EMC-16 |
EC4EC4062885 18 x 16 x 18 mm |
| 1M2-HT, EMC-14 |
EC4EC4072765 12 x 14 x 18 mm |
| 1M2-HT, EMC-16 |
EC4EC4072885 18 x 16 x 18 mm |
| 2M2-HT, EMC-14 |
EC4EC4122765 12 x 14 x 18 mm |
| 2M2-HT, EMC-16 |
EC4EC4122885 18 x 16 x 18 mm |
| 3M2-HT, EMC-14 |
EC4EC4202765 12 x 14 x 18 mm |
| 3M2-HT, EMC-16 |
EC4EC4202885 18 x 16 x 18 mm |
| 4M2-HT, EMC-14 |
EC4EC4282765 12 x 14 x 18 mm |
| 4M2-HT, EMC-16 |
EC4EC4282885 18 x 16 x 18 mm |
| Description | Prod. no. 5 pcs. |
|---|---|
| 1M1-HT, EMC-14 |
EN1EC4062765 12 x 14 x 18 mm |
| 1M1-HT, EMC-16 |
EN1EC4062885 18 x 16 x 18 mm |
| 1M2-HT, EMC-14 |
EN1EC4072765 12 x 14 x 18 mm |
| 1M2-HT, EMC-16 |
EN1EC4072885 18 x 16 x 18 mm |
| 2M2-HT, EMC-14 |
EN1EC4122765 12 x 14 x 18 mm |
| 2M2-HT, EMC-16 |
EN1EC4122885 18 x 16 x 18 mm |
| 3M2-HT, EMC-14 |
EN1EC4202765 12 x 14 x 18 mm |
| 3M2-HT, EMC-16 |
EN1EC4202885 18 x 16 x 18 mm |
| 4M2-HT, EMC-14 |
EN1EC4282765 12 x 14 x 18 mm |
| 4M2-HT, EMC-16 |
EN1EC4282885 18 x 16 x 18 mm |
VITA ENAMIC multiColor – SYSTEM SOLUTIONS*
VITA offers VITA ENAMIC multiColor with specific holder systems for the CAD/CAM systems:
VITA ENAMIC multiColor – UNIVERSAL SOLUTIONS*
VITA offers VITA ENAMIC multiColor with universal holder system for the CAD/CAM systems:
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now