Search & find

...From partial dentures and highly esthetic challenges to comprehensive implant denture restorations using VITAPAN EXCELL:...

...A modern denture tooth for full, partial, and implant-supported dentures:...

Dentist, dental technician, and patient on the VITAPAN EXCELL denture tooth
: Read here for more on the treatment steps with new anterior restorations

Клинический случай полного протезирования из практики доктора Fumiaki Yamazaki при зуботехнической поддержке Toru Odagaki

Data protection

...Case report and laboratory workflow with the VITAPAN EXCELL denture tooth...

VITA AMBRIA, the zirconia-reinforced lithium disilicate ➤ Discover Jürgen Freitag's patient case now

VITAPAN EXCELL^® / VITAPAN^® LINGOFORM

Наше обещание: „VITA – perfect match“ - это когда пользователь чувствует, что он всегда и в любое время находится в центре наших действий!

VITA Service. Regional contact persons. VITA Helpdesk. Advanced training and courses. Trade fairs and events. e-learning. Equipment servicing. Download center.

Клинический случай: Реставрация верхних резцов с помощью VITA SUPRINITY PC в комбинации с VITA VM 11

Clinical Case VITA VMK MASTER

VITA AMBRIA, the zirconia-reinforced lithium disilicate ➤ Discover Professor Knezović Zlatarić's clinical case now

Реставрация фронтального зуба с VITA PM 9.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

Клинические случаи: Фронтальная коронка, Люминиры, Виниры на фронтальные зубы, Протезирование с опорой на имплантат Halit Yağcı. г. Бурса, Турция.

In the interview dental technician Viktor Fürgut reported on his experiences with the new VITAPAN EXCELL set of anterior teeth VITA.

Patientenfälle. VITA Masterpieces. Zahntechniker zeigen ihre besten Patientenfälle: Kronen und Veneers, Zahnfarbbestimmung, Ober- und Unterkiefer-Totalprothese, Seitenzahnkrone, Frontzahnbrücke, Frontzahnkrone, Inlay, Totalprothese, Non-Prep-Veneers.

You simply have to have VITAPAN EXCELL. Interview with master dental technician Anett Böttcher.

Прогресс в протезировании! Фирма VITA олицетворяет высокое качество и профессионализм.

In this interview, the dental technician describes her experiences with VITAPAN EXCELL anterior teeth VITA.

VITA calendar march Carlo Montesarchio

VITA conducted interviews with German dental labs that have tested the new VITAPAN EXCELL line of anterior teeth. Find out what they like most about the new premium prosthesis, the advantages of the p...

VITAPAN EXCELL^®: for all applications. Interview with dental technician Berit Hantusch.

Veteran prosthetics expert meets VITAPAN EXCELL^®. Interview with master dental technician Franz Hoppe.

VITA_Excellence_Award_2023

Клинический случай США Реставрация фронтальных зубов. Протезирование 19-летнего пациента после травмы зубов 21 и 11 с помощью облицованных коронок VITAVM^®9 Amos Harting St. Louis, USA.

VITA tooth shade determination – Always on the cutting edge for the perfect contemporary tooth.

For every challenge VITAPAN EXCELL^®. Interview with dental technician Benjamin Strasser.

The super translucent CAD/CAM block for efficient chair-side treatment: VITA ENAMIC^® ST

Клинический случай: Единичная коронка на передний зуб из VITAPM^®9 из практики зубного техника Francesco Ferretti Rom, Italien.

VITA AKZENT^® Plus for all types of dental-ceramic materials, for the layering and press technique and feldspar ceramic blocks such as VITABLOCS to monolithic restorations. It is suitable for all dental-ceramic materials and for every CTE.

VITA ENAMIC^®. Hybrid dental ceramic

VITAPAN EXCELL – combines the best. Interview with master dental technician Conrad Frerichs

Клинический случай: Реставрация верхних резцов с помощью VITA SUPRINITY PC в комбинации с VITA VM 11

VITA calendar may Dr. Julián Conejo Gutiérrez

Клинический случай Marcio Breda. Виниры для фронтальных зубов и коронки, изготовлены с помощью VITA VMK Master^®.

Patient case Georgy Gerasimov. Anterior tooth veneer and crowns with minimally invasive preparation, fabricated with VITA VM 13.

Kostenfreie Online Workshops für einen offenen, fachlichen und interaktiven Austausch. Sicher mehr Wissen! ► Gleich anmelden – wir freuen uns auf Sie!

VITA VMK Master^®. metal-ceramic

VITA Easyshade^® V & VITA mobileAssist. Tooth shade determination

Of the tooth libraries currently on the market, VITA VIONIC (DIGITAL) VIGO contains the largest selection of 28-tooth setup concepts, a total of seven concepts. These are:

• Setups with "curved" posterior arches (second molar, distal to oral rotation / curved setup): lingualized, buccalized, crossbite, Prof. Gerber setup.
• Setups with linear posterior tooth setup (central fissures for all posterior teeth run in a line; "straight setup"): lingualized, buccalized, Dutch LoC (similar to a lingualized setup, but the first premolar only has one contact point at the mesial-proximal ridge).

Service technician

Register now with “MyVITA” and take advantage of the wide range of resources available in the database!

We have updated the VITA media database so that you can maximize your use of this valuable resource.

...At the push of a button, the VITA VIONIC VIGO smart tooth unle...

...Cosmetic treatment: anterior tooth veneer with minimally invasive preparation...

Полные протезы с зубами VITA PHYSIODENS

...For their outstanding esthetics have been chosen VITAPAN PLUS anteriors. They were combined with VITA LINGOFORM posteriors set in a lingualised occlusion to aid in stability and increased function of the denture....

VITA VIONIC DENT DISC multiColor is suitable for all open systems with a universal disc holder.

We recommend a combination of VITA VIONIC DENT DISC multiColor and VITA VIONIC BASE DISC HI, together with VITA VIONIC BOND adhesive.

Terms and Conditions of participation for the “VITA VIONIC^® DIGITAL VIGO Denture Tooth Library”- competition andinformation with respect to the storage and processing of personal data

Inhaltliche Informationen zum Software Update 220203 für VITA vPad excellence.

...Ready for every photo shoot: A new design for the VITA shade...

VITA calendar october Andreas Hoffmann

VITA calendar april Show Yamamoto

Important information and recommendations regarding the European Medical Device Regulation (MDR)

Please use the reusable VITA VIONIC^® BOND multiDose measuring cup for dosing and mixing.

Dosing table:

Dosing instructions, here in the example for the total quantity of 1 ml (sufficient to bond 14 denture tooth units):

For further processing instructions, see instructions for use for VITA VIONIC^® BOND multiDose (922-13100).

All seven setup concepts can be achieved with one and the same tooth line, VITA VIONIC (DIGITAL) VIGO. You do not need different tooth lines for the various setup concepts.

The reason for this is the universal design of the occlusal surfaces of VITA VIONIC posterior teeth. These allow all the setup concepts mentioned to be achieved.

Clinical studies, dissertations and master's theses

Version 200107 VITA vPad excellence ab Seriennummer 2820172050 bis Seriennummer 2820180274 VITA vPad excellence ab Seriennummer 2820180275 VITA vPad comfort ab Seriennummer 3020180051 VITA VACUMAT 6000 M/MP. VITA ZYRCOMAT 6000/6100 MS

Includes the largest number of setup concepts (seven). Universal occlusal surface geometry: one tooth line for all setups. Combination of anterior and posterior teeth (no fixed 28-tooth setups); individualization of the setup still possible. VIONIC DIGITAL VIGO: Possible to work with VITA VIONIC VIGO denture teeth, as well as milled / 3D-printed teeth. Open system: VIONIC (DIGITAL) VIGO can also be used with milling blanks or with 3D-print materials from competitor companies.

The new software update 200312 for the VITA vPad excellence from serial number 2820170050 to serial number 2820180274, VITA vPad excellence from serial number 2820180275, VITA vPad comfort from serial number 3020180051 is now available.

Полные протезы с зубами VITA PHYSIODENS

Таким образом, здесь вы найдете паспорта безопасности продуктов VITA, информацию об общих рисках стоматологического лечения, остаточных рисках групп продуктов в стоматологической области (таких как ма...

...ended the VITABLOCS TriLuxe forte range to include bright shades 0M1 and 1M1. With...

VITA calendar july Jürgen Freitag

The VITA Newsroom is where all the news used in VITA communication come together. Compact and up to date, information, news and the latest announcements are all available here, first hand and at a glance.

VITABLOCS^® Chairside CAD/CAM Blocs.

Version 210414 VITA vPad excellence serial number from 2820172050 VITA vPad comfort serial number from 3020180051 VITA ZYRCOMAT 6000/6100

The Smart Tooth for Digital Dentures

Up to 42 units can be milled per disc, depending on the selected tooth size and positioning in the disc.

Each VITA VIONIC DENT DISC multiColor disc, is a genuine multilayer disc comprising four layers that are perfectly adapted to one another.

VITA VIONIC DENT DISC multiColor is available in 18 shades – 16 VITA classical A1-D4^® shades (A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4) and two Bleached shades (0 M1, 0 M3).

VITA VIONIC DENT DISC multiColor is available with a diameter of 98.4 mm and a disc height of 20 mm (universal geometry with circumferential shoulder).

Only a one-time payment for use at any time, as long as a valid license is available for the 3Shape Denture Module or the exocad FullDenture module. VITA VIONIC DIGITAL VIGO is activated for a specific USB connector / software license and cannot be transferred.

The VITA VIONIC VIGO Denture Tooth Library (without the option to export tooth data) can be downloaded free of charge and used without any additional steps.

Both approaches are possible.

VITA Customer service

Вы знакомы с привлекательным курортным городом Бад Зекингеном и его красивыми окрестностями, которые придутся по душе каждому? Наши сотрудники покажут вам здесь свои любимые места. Присоединяйтесь к н...

The adhesive is the same, only the dosage type is different.

• VITA VIONIC^® BOND KIT is a single-use application that contains enough material to bond approx. 28 denture teeth. The components come pre-measured and do not need to be dosed.
• VITA VIONIC^® BOND multiDose is designed for multiple applications. The components have to be dosed by the user with the measuring cup. It contains enough material to bond approx. 25 x 14 denture teeth to the respective denture bases.

All other processing and mechanical/physical properties of the adhesive are identical.

The VITA VIONIC VIGO Denture Tooth Library that is free to download only allows monoblock try-ins and denture bases to be exported. The tooth data cannot be exported. This means that denture teeth cannot be milled or printed using 3D systems (only the try-in dentures and the denture bases). The denture bases that have been milled or printed using 3D systems are completed with VITA VIONIC VIGO denture teeth.

In addition to allowing VITA VIONIC VIGO denture teeth to be used, the fee-based VITA VIONIC DIGITAL VIGO Denture Tooth Library also allows the tooth data to be exported so that the denture teeth can be milled or printed using 3D systems.

1. Order VITA VIONIC DIGITAL VIGO through the VITA website.
2. Complete payment.
3. Activate the VITA VIONIC DIGITAL VIGO Denture Tooth Library via the partner software company (3Shape or exocad).
4. Update the VITA VIONIC VIGO Denture Tooth Library for the activated USB connector through the download portal (3Shape) or website (exocad).
5. If required, restart the 3Shape Dental System or exocad Dental DB.

VITA VIONIC DIGITAL VIGO is now available for use.

Link to the order website: www.vita-zahnfabrik.com/vionicdigitalvigo

The components to be bonded (denture teeth, denture base) have to fit together precisely, as VIONIC^® BOND does not fill gaps.

For the specification in the design software (Denture Module from 3Shape A/S or exocad GmbH), we recommend:

• For milled denture bases in combination with VITA VIONIC VIGO^® prefabricated tooth: 40 µm bonding gap.

• For milled denture bases in combination with milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor: 80 µm bonding gap.
• Larger gaps may be necessary for 3D-printed denture bases.

Tip: The denture tooth elements should fit into the corresponding alveoli of the denture base without force, but at the same time, they should also not have any noticeable play.

The bonding surfaces of the components must be dry and free of dust, grease, wax, cooling lubricants and other contaminants.

Towards the oral vestibule, towards the outside, and in the case of tooth surfaces a generic ...

Dental Visionist Englisch 2.9 Abonnenten

Software Update 230802 for VITA vPad excellence as of serial number 2820170050, VITA vPad comfort as of serial number 3020180051, VITA ZYRCOMAT 6100 MS, VITA VACUMAT 6000 M, VITA VACUMAT 6000 MP

Pueden volver a ver los momentos estrella de los Webinars en nuestras grabaciones por vídeo. Cuándo y dónde quieran: la “sala de ExpoMovie“ de la VITA ExpoVirtual se mantendrá abierta en todo momento.

Denture Module with a valid license for either the 3Shape Dental System (Version 2021 or newer) or exocad Dental CAD (version 3.0 Galway or newer).

This is possible in 3Shape and exocad, however, a configuration file must be modified. VITA or exocad can provide support for that.

VITA Update Messenger. Hotfix VITA SMART.FIRE and vPad excellence. Version 210415. English

Version 210414 VITA vPad excellence à compter du numéro de série 2820170050 VITA vPad comfort à compter du numéro de série 3020180051 VITA ZYRCOMAT 6000/6100 MS

Do you want better esthetic results with a press ceramic? → Then read this case report from a fellow dental technician

For technical reasons, the final shade of printed denture teeth is achieved after a few days curing is complete. This is the case with all printed materials and can be attributed to the photoinitiators contained in the resin. These photoinitiators react during the curing process and, in the case of VITA VIONIC DENT RESIN, leave behind a yellow tint. This yellow tint fades over time. Within the first few days after curing, the yellow tint will decrease significantly until the final shade is ultimately achieved.

No, activation is only applicable for the specific respective USB connector that has been activated or for the specific software usage license associated with it. 

Always store it tightly closed in the refrigerator between 5 °C (41 °F) and 10 °C (50 °F). Protect from direct sunlight.

Fracture work values indicate how well a component/material can absorb shocks and impacts (impact energy).

By taking measurements, you can find out at what load the material breaks or starts to give.

The impact strength measurements can be used to draw conclusions about the durability of denture bases, for example.

An impact-resistant denture base material reduces the risk of breakage but does not eliminate it (impact-resistant ≠ unbreakable).

The breaking strength in the event of a fall is highly dependent on the angle of impact and the impact surface. An unfortunate angle and a hard surface will increase the chances of the dentures breaking. This applies to all material types.

The photoinitiators in the resin react in the post-curing units during the curing process, and in the case of VITA VIONIC DENT RESIN, leave behind a yellow tint. This yellow tint will disappear on its own within a few days after curing. However, this process can also be accelerated artificially. This is especially true for lighter shades (0M3, A1 and B1), where the shade match can be visibly achieved faster due to the acceleration of the color drift.

Here, VITA recommends:

After the final polish, place the printed dentures under an LED lamp with a blue light for approx. three hours (wavelength 450-480 nm).

The following device can be used as example:

• FINOLUX light polymerization device 400-550nm

^{Due to the technology used, all printed materials cannot achieve the final shade immediately after curing. This recommendation from VITA offers users a way of accelerating color drift. Blue light treatment is optional and is not a necessary step in the workflow.}

Grinding and preparing the tooth to incorporate dental restorations such as inlays, crowns or ...

Term that refers to positioning towards the center of the dental arch.

In the case of posterior teeth/molars, a term that refers to positioning towards the occlusal ...

Software Update Version V512bLE for VITA Easyshade V Update as of serial number 58600

05.11.2018 TTT-Kurs Trinidad-Tobago

TTT-Kurs 05.11.2018 Rumänien Slowenien Serbien Bosnien Saudi-Arabien Trinidad-Tobago

A treatment concept in dentistry that aims to protect healthy tissue and tooth substance as far ...

Inflammation caused by bacteria that results in a largely irreversible destruction of the ...

La nouvelle mise à jour logicielle 200312 est dès à présent disponible pour VITA vPad excellence, VITA vPad comfort.

Measure in which dental plaque can be removed using a powderblaster, air-abrasive device. ...

3Shape is a Danish company that specializes in the development and marketing of 3D scanners and CAD/CAM software. 3Shape's CAD Design software supports familiar workflows, provides the market's most comprehensive dental indication support, and greatly enhances productivity through extensive automation.

Cooperation in the area of VITA CAD/CAM materials enables the user to design the construction of restorations according to the specific material. In addition, the 3Shape user can use VITA tooth shapes as a design basis for constructions.

Instead of taking a conventional impression using an impression tray and impression material, ...

Software Update 241002 for VITA vPad excellence as of serial number 2820170050, VITA vPad comfort as of serial number 3020180051, VITA VACUMAT 6100 M and VITA SMART.FIRE ADVANCED and Software Update 241007 for VITA V60 i-Line PLUS

VITA Kontaktformular

VITA address center. Sales agencies, service partners and dealers worldwide

The VITA Zahnfabrik locations in Bad Säckingen, Germany. Directions and site plan for the Bad Säckingen location, Germany

VITA calendar june Björn Czappa

Confirmation Receipt of your message to VITA Zahnfabrik.

VITA Company Quality

• A simple, clean bonding process.
• Proven good adhesion, tested according to ISO 22112 and DIN ISO/TS 19736.
• The precise fit of the denture teeth with the denture base is maintained, meaning that little to no manual reworking is required (e.g., little to no adjustment of the occlusion).

VITA Kontaktformular

Dental Visionist Italienisch 2.9 Abonnenten Spanisch

Software Update 221005 for VITA vPad excellence as of serial number 2820172050, VITA vPad comfort as of serial number 3020180051, VITA SMART.FIRE, VITA ZYRCOMAT 6100 MS, VITA ZYRCOMAT 6000 MS, VITA VACUMAT 6000 M, VITA VACUMAT 6000 MP

Dental Visionist Französisch 2.9 2020

Fidélité chromatique optimale. Excellente dynamiqu...

...for extraoral fabrication of dental restorations. It is suitable for a much great...

Carestream Dental has been a market player since 2007 as a growing, independent company with high profits and a healthy cash flow. Carestream Dental provides dentists throughout the world with best-in-class dental products such as X-ray systems and solutions for practice management that facilitate outstanding patient care and are the preferred choice of seven out of ten dentists. If you would like further information on dental equipment visit the Carestream Dental website at

VITA VIONIC^® BOND or VITA VIONIC^® BOND multiDose are components of VITA VIONIC^® SOLUTIONS, the system for the digitally supported removable dentures from VITA Zahnfabrik.

If stored correctly (closed tightly at a temperature between 5 °C and 10 °C, that is, 41 °F and 50 °F), it should be used within 90 days of opening.

VITA VIONIC^® BOND and VITA VIONIC^® BOND multiDose are self-curing. The curing process begins as soon as the two components of the adhesive come into contact with each other. At an ambient temperature of approx. 21 °C (70 °F), the working time is approx. 10 minutes. If the adhesive begins to gel or form threads, discontinue use.

...VITA AKZENT LC was especially developed to add colour and character to restoration...

Imprint

25.10.2018 Australien

Para poder ver los videos les rogamos registrarse en la página indicada de MyVITA.

Software Update 231218 for VITA V60 i-Line^® PLUS

Software Update 240606 for VITA vPad excellence as of serial number 2820180275, VITA vPad comfort as of serial number 3020180051, VITA VACUMAT 6000 M/MP, VITA ZYRCOMAT 6100 MS and VITA SMART.FIRE

Karriere bei VITA

Standort der VITA Zahnfabrik.

VITA Easyshade V Update as of serial number 58600

TTT-Kurs 05.11.12018 Slowenien Rumänien Slowenien Serbien Bosnien Saudi-Arabien Trinidad-Tobago

TTT-Kurs 05.11.2018 Serbien Rumänien Slowenien Serbien Bosnien Saudi-Arabien Trinidad-Tobago

Реставрация фронтального зуба с VITA PM 9

Yes, the following soft relining materials have been tested:

• LabSide: Molloplast^® B
• Chairside: Mollosil^® plus

Mise à jour Hotfix VITA vPad excellence, VITA SMART.FIRE. Version 210415. French

Version 200107 VITA vPad excellence ab Seriennummer 2820172050 bis Seriennummer 2820180274 VITA vPad excellence ab Seriennummer 2820180275 VITA vPad comfort ab Seriennummer 3020180051 VITA VACUMAT 6000 M/MP. VITA ZYRCOMAT 6000/6100 MS

VITA LUMEX^® ACby Dusan Dragutinovicin English

Technical device used in dentistry to simulate the movement of the temporomandibular joint and ...

Dental Wings ist ein führender Anbieter digitaler Lösungen für die Dentalbranche. Zu den Lösungen zählen dentale Scananwendungen, Implantatplanung und geführte Chirurgie, Design von Zahnersatz, Lösungen zur Fertigungsanbindung sowie Tools für die Kommunikation der eingebundenen Experten und Fachleute.

Dental Wings hat die Vision, das größte weltweite Netzwerk digital arbeitender Zahnärzte und Dentallabore zu schaffen und hierfür die Diagnose-, Design- und Fertigungstools bereitzustellen, mit denen sie ihre Effizienz sowie die Qualität und Rentabilität der für Patienten erbrachten Leistungen steigern können.

Appliance service overview page

Software Update 220203 for VITA vPad excellence as of serial number 2820180275, VITA vPad comfort as of serial number 3020180051, VITA ZYRCOMAT 6100 MS and VITA SMART.FIRE

Software Update 220718 for VITA vPad excellence as of serial number 2820180275, VITA vPad comfort as of serial number 3020180051, VITA ZYRCOMAT 6100 MS and VITA SMART.FIRE

Software Update 221005 for VITA V60 i-Line^®

Determination of the tooth shade, e.g. for a filling or a crown, using a digital shade-taking ...

Special type of veneer (ceramic shell) that does not require preparation of the tooth substance ...

Acrylic splint for treating conditions of the masticatory system (e.g. bruxism, grinding). The ...

...he Verblendung auf den keramischen Werkstoffen Lithiumdisilikat, Zirkondioxid und...

Version 200107 VITA vPad excellence ab Seriennummer 2820172050 bis Seriennummer 2820180274 VITA vPad excellence ab Seriennummer 2820180275 VITA vPad comfort ab Seriennummer 3020180051 VITA VACUMAT 6000 M/MP. VITA ZYRCOMAT 6000/6100 MS

La nueva actualización de software 200312 para: VITA vPad excellence, VITA vPad comfort.

Appliance service overview page

Privacy Policy for photographs/video recordings at trade shows

Versión 210414 VITA vPad excellence a partir del número de serie 2820170050 VITA vPad comfort a partir del número de serie 3020180051 VITA ZYRCOMAT 6000/6100 MS

Acrylate-based materials (PMMA and acrylate-based composites). Used especially for permanently bonding denture teeth:

• VITA VIONIC VIGO^® prefabricated teeth or
• milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor

with

• milled denture bases made of VITA VIONIC^® BASE DISC HI.
• Furthermore, the adhesive bond achieved with VITA VIONIC^® BOND has been validated on various 3D-printed denture base materials from the competition. List: https://www.vita-zahnfabrik.com/vionic_compatibility

Yes, the resin can be stored in the tray temporarily between two printing jobs. It must be protected from light and stored at room temperature (14 – 25°C). Before each new print, ensure that no fragments from previous printing jobs have been left in the resin. If in doubt, the resin should be filtered through a fine sieve before reusing. It is also important to homogenize the resin in the tray before starting a new printing job. Here, a silicone spatula is used to mix the resin thoroughly in the tray.

E-Learning

Yes, printed denture bases made of VITA VIONIC BASE RESIN IMPACT can be relined/repaired.

1)     Roughen the surface
2)     Apply cold-curing polymer (e.g., Schütz Dental Futura Gen pink opaque or Merz Dental “Weropress pink”)

Interview mit Sissi Großkreuz, Junior Regulatory Affairs Specialist. Ihr Karriereweg in die VITA Zahnfabrik.

"In 1990, the machine trading division of the W. Geis engineering office (founded in 1983) became a separate business and was established as MB Maschinenhandel Biebergemund GmbH."

MB develops, manufactures and sells machines for spark erosion applications. The second key element of the business is dental milling technology.

Proven, simultaneous 5-axis milling machines as well as continuous innovation in the processing of all materials and in milling technology complete the business profile.

VITA Zahnfabrik and MB Maschinen GmbH develop and validate templates on an ongoing basis for processing VITA CAD/CAM materials using MB dental milling machines.

VITA VIONIC BASE RESIN IMPACT is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab.

Approx. 50 denture bases can be printed from 1 kg of VITA VIONIC TRY-IN RESIN.

The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.