Search & find

From partial dentures and highly esthetic challenges to comprehensive implant denture restorations using VITAPAN EXCELL: Be inspired by our case reports from fellow professionals!

A modern denture tooth for full, partial, and implant-supported dentures: Discover our range of shades and moulds, case studies and testimonials now!

Dentist, dental technician, and patient on the VITAPAN EXCELL denture tooth
: Read here for more on the treatment steps with new anterior restorations

Case report and laboratory workflow with the VITAPAN EXCELL denture tooth Read the experience of denturist Tanya Little and her patient Deanne here

Patient case Georgy Gerasimov. Anterior tooth veneer and crowns with minimally invasive preparation, fabricated with VITA VM 13.

VITA AMBRIA, the zirconia-reinforced lithium disilicate ➤ Discover Professor Knezović Zlatarić's clinical case now

Para poder ver los videos les rogamos registrarse en la página indicada de MyVITA.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

VITA vPad excellence & VITA vPad comfort. Пульт управления для любых потребностей.

Наше обещание: „VITA – perfect match“ - это когда пользователь чувствует, что он всегда и в любое время находится в центре наших действий!

Клинический случай: Реставрация верхних резцов с помощью VITA SUPRINITY PC в комбинации с VITA VM 11

Versión 210414 VITA vPad excellence a partir del número de serie 2820170050 VITA vPad comfort a partir del número de serie 3020180051 VITA ZYRCOMAT 6000/6100 MS

La nueva actualización de software 200312 para: VITA vPad excellence, VITA vPad comfort.

Version 200107 VITA vPad excellence ab Seriennummer 2820172050 bis Seriennummer 2820180274 VITA vPad excellence ab Seriennummer 2820180275 VITA vPad comfort ab Seriennummer 3020180051 VITA VACUMAT 6000 M/MP. VITA ZYRCOMAT 6000/6100 MS

Реставрация фронтального зуба с VITA PM 9.

Прогресс в протезировании! Фирма VITA олицетворяет высокое качество и профессионализм.

The VITA Newsroom is where all the news used in VITA communication come together. Compact and up to date, information, news and the latest announcements are all available here, first hand and at a gla...

VITAPAN EXCELL^® / VITAPAN^® LINGOFORM

Clinical Case VITA VMK MASTER

Inhaltliche Informationen zum Software Update 220203 für VITA vPad excellence.

VITA AMBRIA, the zirconia-reinforced lithium disilicate ➤ Discover Jürgen Freitag's patient case now

VITA AKZENT^® Plus for all types of dental-ceramic materials, for the layering and press technique and feldspar ceramic blocks such as VITABLOCS to monolithic restorations. It is suitable for all denta...

VITA Service. Regional contact persons. VITA Helpdesk. Advanced training and courses. Trade fairs and events. e-learning. Equipment servicing. Download center.

Клинический случай полного протезирования из практики доктора Fumiaki Yamazaki при зуботехнической поддержке Toru Odagaki

Actualización de software 221005 para VITA V60 i-Line^®

Клинический случай: Единичная коронка на передний зуб из VITAPM^®9 из практики зубного техника Francesco Ferretti Rom, Italien.

Клинический случай Marcio Breda. Виниры для фронтальных зубов и коронки, изготовлены с помощью VITA VMK Master^®.

Actualización de software 230802 para VITA vPad excellence a partir del número de serie 2820170050, VITA vPad comfort a partir del número de serie 3020180051, VITA ZYRCOMAT 6100 MS, VITA VACUMAT 6000 M, VITA VACUMAT 6000 MP

Appliance service overview page

VITA Easyshade^® V & VITA mobileAssist. Tooth shade determination

VITA tooth shade determination – Always on the cutting edge for the perfect contemporary tooth.

Клинический случай США Реставрация фронтальных зубов. Протезирование 19-летнего пациента после травмы зубов 21 и 11 с помощью облицованных коронок VITAVM^®9 Amos Harting St. Louis, USA.

Data protection

Important information and recommendations regarding the European Medical Device Regulation (MDR)

Actualización de software 220718 para VITA vPad excellence a partir del número de serie 2820180275, VITA vPad comfort a partir del número de serie 3020180051, VITA ZYRCOMAT 6100 MS y VITA SMART.FIRE

Actualización de software 221005 para VITA vPad excellence a partir del número de serie 2820172050, VITA vPad comfort a partir del número de serie 3020180051, VITA SMART.FIRE, VITA ZYRCOMAT 6100 MS, VITA ZYRCOMAT 6000 MS, VITA VACUMAT 6000

Actualización de software 220203 para VITA vPad excellence a partir del número de serie 2820180275, VITA vPad comfort a partir del número de serie 3020180051, VITA ZYRCOMAT 6100 MS y VITA SMART.FIRE

Pueden volver a ver los momentos estrella de los Webinars en nuestras grabaciones por vídeo. Cuándo y dónde quieran: la “sala de ExpoMovie“ de la VITA ExpoVirtual se mantendrá abierta en todo mome...

Boletín de actualización de VITA. Actualización de Hotfix VITA SMART.FIRE, vPad excellence. Versión 210415. Spanish

Service technician

Клинический случай: Реставрация верхних резцов с помощью VITA SUPRINITY PC в комбинации с VITA VM 11

VITA Company Quality

15.04.2021 ...

In the interview dental technician Viktor Fürgut reported on his experiences with the new VITAPAN EXCELL set of anterior teeth VITA.

In this interview, the dental technician describes her experiences with VITAPAN EXCELL anterior teeth VITA.

Actualización de software 241002 para VITA vPad excellence a partir del número de serie 2820170050, VITA vPad comfort a partir del número de serie 3020180051, VITA VACUMAT 6100 M y VITA SMART.FIRE ADVANCED y Software Update 241007 para VITA

Actualización de software para el VITA Easyshade V V511vLE a partir del número de serie 58600

Actualización de software para el VITA Easyshade V V512bLE a partir del número de serie 58600

Actualización de software 240606 para VITA vPad excellence a partir del número de serie 2820180275, VITA vPad comfort a partir del número de serie 3020180051, VITA ZYRCOMAT 6100 MS y VITA SMART.FIRE

Measure in which dental plaque can be removed using a powderblaster, air-abrasive device. ...

The latest software updates are available as downloads from our website, free-of-charge. We recommend signing-up to our update manager to ensure that you are always running the latest version of software. If you have an active internet connection, the vPad can also download and install the updates automatically.

Yes, printed clasp dentures made from VITA VIONIC BASE RESIN FLEX can be repaired and extended.

VITA recommends the following materials and procedures for this purpose:

• For the shade pink translucent: Astron Labtec Pro
• For the shade clear: Astron Clearsplint

1. Sandblasting with Al₂O₃ (50 µm, 2 bar)
2. Application of VITA VM LC Primer II to condition the denture base.
3. Apply a thin, even layer using a disposable brush. Then cure with an approved light-curing device in accordance with the polymerization instructions for VITA VM LC Primer II.
4. Application and processing of Astron Clearsplint or Astron Labtec Pro according to the manufacturer's instructions.

Repairs using classic cold polymer are also possible in principle. However, the rigid material can impair the flexibility of the partial denture, thereby reducing the expected service life of the denture.

VITA conducted interviews with German dental labs that have tested the new VITAPAN EXCELL line of anterior teeth. Find out what they like most about the new premium prosthesis, the advantages of the p...

VITAPAN EXCELL – combines the best. Interview with master dental technician Conrad Frerichs

Please use the reusable VITA VIONIC^® BOND multiDose measuring cup for dosing and mixing.

Dosing table:

Dosing instructions, here in the example for the total quantity of 1 ml (sufficient to bond 14 denture tooth units):

For further processing instructions, see instructions for use for VITA VIONIC^® BOND multiDose (922-13100).

Yes, the resin can be stored in the tray temporarily between two printing jobs. It must be protected from light and stored at room temperature (14 – 28°C). Before each new print, ensure that no fragments from previous printing jobs have been left in the resin. If in doubt, the resin should be filtered through a fine sieve before reusing. It is also important to homogenize the resin in the tray before starting a new printing job. Here, a silicone spatula is used to mix the resin thoroughly in the tray.

Inflammation caused by bacteria that results in a largely irreversible destruction of the ...

Terms and Conditions of participation for the “VITA VIONIC^® DIGITAL VIGO Denture Tooth Library”- competition andinformation with respect to the storage and processing of personal data

We have updated the VITA media database so that you can maximize your use of this valuable resource.

01.03.2023 ...

VITA VMK Master^®. metal-ceramic

VITA Customer service

The components to be bonded (denture teeth, denture base) have to fit together precisely, as VIONIC^® BOND does not fill gaps.

For the specification in the design software (Denture Module from 3Shape A/S or exocad GmbH), we recommend:

• For milled denture bases in combination with VITA VIONIC VIGO^® prefabricated tooth: 40 µm bonding gap.

• For milled denture bases in combination with milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor: 80 µm bonding gap.
• Larger gaps may be necessary for 3D-printed denture bases.

Tip: The denture tooth elements should fit into the corresponding alveoli of the denture base without force, but at the same time, they should also not have any noticeable play.

The bonding surfaces of the components must be dry and free of dust, grease, wax, cooling lubricants and other contaminants.

The photoinitiators in the resin react in the post-curing units during the curing process, and in the case of VITA VIONIC DENT RESIN, leave behind a yellow tint. This yellow tint will disappear on its own within a few days after curing. However, this process can also be accelerated artificially. This is especially true for lighter shades (0M3, A1 and B1), where the shade match can be visibly achieved faster due to the acceleration of the color drift. 

Here, VITA recommends:

Option 1:

After the final polish, place the printed dentures under an LED lamp with a blue light for approx. three hours (wavelength 450-480 nm).

The following device can be used as example:

• FINOLUX light polymerization device 400-550nm

Option 2:

Alternatively, after the final polishing, you can place the printed denture in a heating cabinet or oven at 60°C for approx. 5 h.

^{Due to the technology used, all printed materials cannot achieve the final shade immediately after curing. This recommendation from VITA offers users a way of accelerating color drift. Blue light treatment is optional and is not a necessary step in the workflow.}

15.09.2021 ...

The cleaning process is carried out by dental laboratories/dental practices in an ultrasonic bath (room temperature water bath). Do not use heat-based disinfection or sterilization methods. This could cause the denture to lose its shape.

Brief immersion disinfection is possible without any problems, provided that ethanol-based disinfectants are not used.

For daily cleaning of the dentures, the patient should use lukewarm water, a soft toothbrush, liquid soap or dishwashing liquid. Rinse well afterwards. Denture cleaning tablets can be used according to the manufacturer's instructions.

Notes: Do not use toothpaste, as the abrasive particles are coarse and will scratch the dentures. Do not use acids or solvents, as these will deteriorate the material properties when applied.

You simply have to have VITAPAN EXCELL. Interview with master dental technician Anett Böttcher.

The super translucent CAD/CAM block for efficient chair-side treatment: VITA ENAMIC^® ST

Imprint

Yes, VITA AKZENT LC light-curing composite stains have been validated for use with the NK Optik Otoflash G171 N2 post-curing device.

Without nitrogen, 1800 flashes must be used.

With nitrogen, 900 flashes are sufficient to cure VITA AKZENT LC.

For every challenge VITAPAN EXCELL^®. Interview with dental technician Benjamin Strasser.

VITAPAN EXCELL^®: for all applications. Interview with dental technician Berit Hantusch.

Aggiornamento Software 221005 per VITA V60 i-Line^®

Dental Visionist Italienisch 2.9 Abonnenten Spanisch

Software Update 221005 for VITA V60 i-Line^®

Mises à jour logicielles 221005 pour VITA V60 i-Line^®

Actualización de software 231120 para VITA V60 i-Line^® PLUS

Actualización de software 231218 para VITA V60 i-Line^® PLUS

VITA DENTIST SOLUTIONS: комплексное системное решение для врачей-стоматологов из одних рук.

VITA Kontaktformular

Confirmation Receipt of your message to VITA Zahnfabrik.

VITA Kontaktformular

VITA VIONIC DENT RESIN is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

VITA VIONIC BASE RESIN FLEX is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

VITA VIONIC BASE RESIN IMPACT is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

VITA VIONIC TRY-IN RESIN is compatible with a wide range of commonly used printers and post-curing units. A current list of successfully validated devices can be found on the product page under the "System compatibility" tab or at the following link: VITA VIONIC RESIN | Validated devices

The material thickness determines the flexibility of the partial denture. The finer the clamp design, the more flexible it reacts, while a stronger design provides more stability.

• Clamps: Ideally 1-1.5 mm
• Minimum wall thickness of tooth pockets: 0.8-1 mm
• Bonding gap for teeth: 150µm
• Palatal: 2-3 mm
• Sublingual: 3-5 mm

VITA VIONIC DENT DISC multiColor is suitable for all open systems with a universal disc holder.

We recommend a combination of VITA VIONIC DENT DISC multiColor and VITA VIONIC BASE DISC HI, together with VITA VIONIC BOND adhesive.

Kostenfreie Online Workshops für einen offenen, fachlichen und interaktiven Austausch. Sicher mehr Wissen! ► Gleich anmelden – wir freuen uns auf Sie!

Approx. 28 monoblocks or 60 try-ins (single jaw) can be printed from 1 kg of VITA VIONIC TRY-IN RESIN.

The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.

Only a one-time payment for use at any time, as long as a valid license is available for the 3Shape Denture Module or the exocad FullDenture module. VITA VIONIC DIGITAL VIGO is activated for a specific USB connector / software license and cannot be transferred.

The VITA VIONIC VIGO Denture Tooth Library (without the option to export tooth data) can be downloaded free of charge and used without any additional steps.

All seven setup concepts can be achieved with one and the same tooth line, VITA VIONIC (DIGITAL) VIGO. You do not need different tooth lines for the various setup concepts.

The reason for this is the universal design of the occlusal surfaces of VITA VIONIC posterior teeth. These allow all the setup concepts mentioned to be achieved.

Approx. 50 denture bases can be printed from 1 kg of VITA VIONIC BASE RESIN IMPACT.

The actual number of printed objects that can be produced using 1kg of resin depends on several factors, such as the number of support structures, whether the resin is stored in the print tray or whether material is lost when it drips off.

Since 1924, we have been developing ever better solutions for perfect prosthetics in terms of function and esthetics. This is the VITA PERFECT MATCH and groundbreaking claim of VITA Zahnfabrik. Dental...

...Cosmetic treatment: anterior tooth veneer with minimally invasive preparation...

VITA VIONIC^® BOND or VITA VIONIC^® BOND multiDose are components of VITA VIONIC^® SOLUTIONS, the system for the digitally supported removable dentures from VITA Zahnfabrik.

The liquid ceramic

Grinding and preparing the tooth to incorporate dental restorations such as inlays, crowns or ...

Privacy Policy for photographs/video recordings at trade shows

Technical device used in dentistry to simulate the movement of the temporomandibular joint and ...

Determination of the tooth shade, e.g. for a filling or a crown, using a digital shade-taking ...

VITA address center. Sales agencies, service partners and dealers worldwide

Yes, the following soft relining materials have been tested:

• LabSide: Molloplast^® B
• Chairside: Mollosil^® plus

VITA TECHNICIAN SOLUTIONS: комплексное системное решение для зубных техников из одних рук.

Both approaches are possible.

VITA VIONIC DENT DISC multiColor is available in 18 shades – 16 VITA classical A1-D4^® shades (A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4) and two Bleached shades (0 M1, 0 M3).

Acrylic splint for treating conditions of the masticatory system (e.g. bruxism, grinding). The ...

The Otoflash G171 N2 has been validated for VITA AKZENT LC with a UV filter type 280 N2. This filter transmits wavelengths from 280 to 700 nm.

Aus 1 kg VITA VIONIC BASE RESIN FLEX können ca. 606 flexible Klammerprothesen gedruckt werden, welche eine Größe von 1-2 zu ersetzenden Zähnen haben und in eine kleine Schaltlücke passen.

Die tatsächliche Anzahl gedruckter Objekte, die mittels 1kg Harz hergestellt werden können, ist von mehreren Faktoren abhängig wie z.B. der Größe der Klammerprothese, der Anzahl an Stützstrukturen und ob das Harz in der Druckwanne gelagert wird bzw. Materialverluste beim Abtropfen entstehen.

Yes, the operation of older firing units is possible. Please be aware that an additional Power-Injector cable will be required for this.

No, activation is only applicable for the specific respective USB connector that has been activated or for the specific software usage license associated with it. 

VITA VIONIC DENT DISC multiColor is available with a diameter of 98.4 mm and a disc height of 20 mm (universal geometry with circumferential shoulder).

Denture Module with a valid license for either the 3Shape Dental System (Version 2021 or newer) or exocad Dental CAD (version 3.1 Reijka or newer).

Deposit on the teeth, especially at hardly accessible areas. It consists of saliva, metabolites ...

Each VITA VIONIC DENT DISC multiColor disc, is a genuine multilayer disc comprising four layers that are perfectly adapted to one another.

Yes, alongside the firing programs for all VITA materials, there are also programs installed for other manufacturers. In addition, individual programs can be created and saved in the memory, if required.

Yes, all the firing data is automatically saved in the background. You can use the VITA Firing Data System (FDS) PC software to manage the data with ease, and to export it if required. The software is available for free download from our website.

Procedure in dentistry. By taking an impression a negative mold of the jaws is manufactured; ...

Up to 42 units can be milled per disc, depending on the selected tooth size and positioning in the disc.

Yes, printed denture bases made of VITA VIONIC BASE RESIN IMPACT can be relined/repaired.

1)     Roughen the surface
2)     Apply cold-curing polymer (e.g., Schütz Dental Futura Gen pink opaque or Paladur rosa/pink)

This is possible in 3Shape and exocad, however, a configuration file must be modified. VITA or exocad can provide support for that.

VITA_Excellence_Award_2023

Instead of taking a conventional impression using an impression tray and impression material, ...

Acrylate-based materials (PMMA and acrylate-based composites). Used especially for permanently bonding denture teeth:

• VITA VIONIC VIGO^® prefabricated teeth or
• milled denture tooth elements made of VITA VIONIC^® DENT DISC multiColor

with

• milled denture bases made of VITA VIONIC^® BASE DISC HI.
• Furthermore, the adhesive bond achieved with VITA VIONIC^® BOND has been validated on various 3D-printed denture base materials from the competition. List: https://www.vita-zahnfabrik.com/vionic_compatibility

3Shape is a Danish company that specializes in the development and marketing of 3D scanners and CAD/CAM software. 3Shape's CAD Design software supports familiar workflows, provides the market's most comprehensive dental indication support, and greatly enhances productivity through extensive automation.

Cooperation in the area of VITA CAD/CAM materials enables the user to design the construction of restorations according to the specific material. In addition, the 3Shape user can use VITA tooth shapes as a design basis for constructions.

"In 1990, the machine trading division of the W. Geis engineering office (founded in 1983) became a separate business and was established as MB Maschinenhandel Biebergemund GmbH."

MB develops, manufactures and sells machines for spark erosion applications. The second key element of the business is dental milling technology.

Proven, simultaneous 5-axis milling machines as well as continuous innovation in the processing of all materials and in milling technology complete the business profile.

VITA Zahnfabrik and MB Maschinen GmbH develop and validate templates on an ongoing basis for processing VITA CAD/CAM materials using MB dental milling machines.

Always store it tightly closed in the refrigerator between 5 °C (41 °F) and 10 °C (50 °F). Protect from direct sunlight.

The VITA VIONIC VIGO Denture Tooth Library that is free to download only allows monoblock try-ins and denture bases to be exported. The tooth data cannot be exported. This means that denture teeth cannot be milled or printed using 3D systems (only the try-in dentures and the denture bases). The denture bases that have been milled or printed using 3D systems are completed with VITA VIONIC VIGO denture teeth.

In addition to allowing VITA VIONIC VIGO denture teeth to be used, the fee-based VITA VIONIC DIGITAL VIGO Denture Tooth Library also allows the tooth data to be exported so that the denture teeth can be milled or printed using 3D systems.

E-Learning

Register now with “MyVITA” and take advantage of the wide range of resources available in the database!

Do you want better esthetic results with a press ceramic? → Then read this case report from a fellow dental technician

If stored correctly (closed tightly at a temperature between 5 °C and 10 °C, that is, 41 °F and 50 °F), it should be used within 90 days of opening.

Controlling more than one firing unit is only possible using the VITA vPad PRO. In this case, up to four firing units can be operated at the same time using a single vPad.

1. Order VITA VIONIC DIGITAL VIGO through the VITA website.
2. Complete payment.
3. Activate the VITA VIONIC DIGITAL VIGO Denture Tooth Library via the partner software company (3Shape or exocad).
4. Update the VITA VIONIC VIGO Denture Tooth Library for the activated USB connector through the download portal (3Shape) or website (exocad).
5. If required, restart the 3Shape Dental System or exocad Dental DB.

VITA VIONIC DIGITAL VIGO is now available for use.

Link to the order website: www.vita-zahnfabrik.com/vionicdigitalvigo

VITA ENAMIC^®. Hybrid dental ceramic

The adhesive is the same, only the dosage type is different.

• VITA VIONIC^® BOND KIT is a single-use application that contains enough material to bond approx. 28 denture teeth. The components come pre-measured and do not need to be dosed.
• VITA VIONIC^® BOND multiDose is designed for multiple applications. The components have to be dosed by the user with the measuring cup. It contains enough material to bond approx. 25 x 14 denture teeth to the respective denture bases.

All other processing and mechanical/physical properties of the adhesive are identical.

Includes the largest number of setup concepts (seven). Universal occlusal surface geometry: one tooth line for all setups. Combination of anterior and posterior teeth (no fixed 28-tooth setups); individualization of the setup still possible. VIONIC DIGITAL VIGO: Possible to work with VITA VIONIC VIGO denture teeth, as well as milled / 3D-printed teeth. Open system: VIONIC (DIGITAL) VIGO can also be used with milling blanks or with 3D-print materials from competitor companies.

Клинические случаи: Фронтальная коронка, Люминиры, Виниры на фронтальные зубы, Протезирование с опорой на имплантат Halit Yağcı. г. Бурса, Турция.

VITA VIONIC^® BOND and VITA VIONIC^® BOND multiDose are self-curing. The curing process begins as soon as the two components of the adhesive come into contact with each other. At an ambient temperature of approx. 21 °C (70 °F), the working time is approx. 10 minutes. If the adhesive begins to gel or form threads, discontinue use.

• A simple, clean bonding process.
• Proven good adhesion, tested according to ISO 22112 and DIN ISO/TS 19736.
• The precise fit of the denture teeth with the denture base is maintained, meaning that little to no manual reworking is required (e.g., little to no adjustment of the occlusion).

Of the tooth libraries currently on the market, VITA VIONIC (DIGITAL) VIGO contains the largest selection of 28-tooth setup concepts, a total of seven concepts. These are:

• Setups with "curved" posterior arches (second molar, distal to oral rotation / curved setup): lingualized, buccalized, crossbite, Prof. Gerber setup.
• Setups with linear posterior tooth setup (central fissures for all posterior teeth run in a line; "straight setup"): lingualized, buccalized, Dutch LoC (similar to a lingualized setup, but the first premolar only has one contact point at the mesial-proximal ridge).

VITA recommends the following procedure for vacuum-based, validated devices (such as the Asiga Cure or RapidShape Cure):

Step 1: ​

Secure the printed teeth in the denture base using a light-curing UV hand lamp, provided that you are using the printing material as an adhesive. It is sufficient to irradiate the areas between the tooth and the base for a few seconds.

Step 2:​

Complete curing in the device using the VITA template.

Fracture work values indicate how well a component/material can absorb shocks and impacts (impact energy).

By taking measurements, you can find out at what load the material breaks or starts to give.

The impact strength measurements can be used to draw conclusions about the durability of denture bases, for example.

An impact-resistant denture base material reduces the risk of breakage but does not eliminate it (impact-resistant ≠ unbreakable).

The breaking strength in the event of a fall is highly dependent on the angle of impact and the impact surface. An unfortunate angle and a hard surface will increase the chances of the dentures breaking. This applies to all material types.

Таким образом, здесь вы найдете паспорта безопасности продуктов VITA, информацию об общих рисках стоматологического лечения, остаточных рисках групп продуктов в стоматологической области (таких как ма...

10.03.2020 ...

15.09.2021 ...

Veteran prosthetics expert meets VITAPAN EXCELL^®. Interview with master dental technician Franz Hoppe.