It appears that you are currently in United States.
United States
Composite made of highly cross-linked acrylate polymer with microfiller for the fabrication of long-term temporary restorations
Recommended indications*
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
VITA SYSTEM 3D-MASTER®
1M2T, 2M2T, 3M2T
Discs (Ø 98.4 mm):
Blocks (mm):
| Description | Prod. no. 1 pc. | Prod. no. 2 pcs. | Prod. no. 10 pcs. |
|---|---|---|---|
| 1M2T, CTM-40 | - |
EC41M2TM402 15,5 x 19 x 39 mm |
EC41M2TM4010 15,5 x 19 x 39 mm |
| 1M2T, CTM-85/40 |
EC41M2TM85401 18 x 40 x 85 mm |
- | - |
| 2M2T, CTM-40 | - |
EC42M2TM402 15,5 x 19 x 39 mm |
EC42M2TM4010 15,5 x 19 x 39 mm |
| 2M2T, CTM-85/40 |
EC42M2TM85401 18 x 40 x 85 mm |
- | - |
| 3M2T, CTM-40 | - |
EC43M2TM402 15,5 x 19 x 39 mm |
EC43M2TM4010 15,5 x 19 x 39 mm |
| 3M2T, CTM-85/40 |
EC43M2TM85401 18 x 40 x 85 mm |
- | - |
| Description | Prod. no. 2 pcs. | Prod. no. 10 pcs. |
|---|---|---|
| 1M2T, CTM-40 |
EN1CA2071922 15,5 x 19 x 39mm |
EN1CA20719210 15,5 x 19 x 39mm |
| 2M2T, CTM-40 |
EN1CA2121922 15,5 x 19 x 39mm |
EN1CA21219210 15,5 x 19 x 39mm |
| 3M2T, CTM-40 |
EN1CA2201922 15,5 x 19 x 39mm |
EN1CA22019210 15,5 x 19 x 39mm |
| Description | Prod. no. |
|---|---|
| VITA CAD-Temp multiColor, 1M2T, Ø 98.4 x h 18 mm, 1 pc. | EC1M2TMD98181 |
| VITA CAD-Temp multiColor, 2M2T, Ø 98.4 x h 18 mm, 1 pc. | EC2M2TMD98181 |
| VITA CAD-Temp multiColor, 3M2T, Ø 98.4 x h 18 mm, 1 pc. | EC3M2TMD98181 |
VITAVM®LC
Light-curing, microparticle composite for extraoral use with fixed and removable restorations
VITA AKZENT® LC
Reliable reproduction of individual shade effects
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITA CAD-Temp – SYSTEM SOLUTIONS*
VITA offers VITA CAD-Temp with specific holder systems or in specific geometries for the CAD/CAM systems:
VITA CAD-Temp – UNIVERSAL SOLUTIONS*
VITA offers VITA CAD-Temp in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM systems:
Note: VITA CAD-Temp DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register now