VITABLOCS RealLife are polychromatic, tooth-colored feldspar blanks with an integrated 3D layer structure that reproduce the natural shade gradient.
Register for MyVITA now
Please select treatment/processing step and get the corresponding product overview.
Please select treatment/processing step and get the corresponding product overview.
VITABLOCS RealLife are polychromatic, tooth-colored feldspar blanks with an integrated 3D layer structure that reproduce the natural shade gradient.
Durable
Fabricating reliable restorations thanks to a durable material with very good clinical performance.
Highly esthetic
Highly esthetic restorations thanks to a material with superior play of colors and light.
Efficient
Cost-effective reconstruction thanks to time-saving CAM fabrication and efficient finishing using a polishing process.
Recommended indications*
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective instructions for use of the products.
VITA SYSTEM 3D MASTER®
0M1C, 1M1C, 1M2C, 2M1C, 2M2C and 3M2C
Blocks (mm):
Description | Prod. no. 5 pcs. |
---|---|
0M1C, RL-14/14 |
EC40M1CRW1414 14 x 14 x 18 mm |
1M1C, RL-14/14 |
EC41M1CRW1414 14 x 14 x 18 mm |
1M2C, RL-14/14 |
EC41M2CRW1414 14 x 14 x 18 mm |
2M1C, RL-14/14 |
EC42M1CRW1414 14 x 14 x 18 mm |
2M2C, RL-14/14 |
EC42M2CRW1414 14 x 14 x 18 mm |
3M2C, RL-14/14 |
EC43M2CRW1414 14 x 14 x 18 mm |
VITA LUMEX® AC
The modern and reliable veneering ceramic for all conventional framework ceramic and titanium.
VITA AKZENT® Plus
Optimizes everything. Effortlessly.
VITA ADIVA® FULL-ADHESIVE
The full-adhesive luting system with perfectly matched components for conditioning tooth substance and restorative material
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITABLOCS RealLife – SYSTEM SOLUTIONS*
VITA offers VITABLOCS RealLife with specific holder systems for the CAD/CAM systems:
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Declarations of conformity can only be accessed with MyVITA access. You can register for MyVITA by using the following link.
Register nowVITA Zahnfabrik
H. Rauter GmbH & Co. KG
Postfach 1338
D-79704 Bad Säckingen
Phone+49 7761 562 0
Fax+49 7761 562 299
info@vita-zahnfabrik.com